Top 10 Best Methanol Injection Kit With Expert Recommendation

Last Update:

You can trust our selection for Methanol Injection Kit Reviews. Because We have worked hard studying and analyzing 40983 reviews for Methanol Injection Kit and rating them. It was a difficult job to list only ten products for Methanol Injection Kit where thousands of them available online. I hope it will help you to take final decision for Best Methanol Injection Kit.

Best Methanol Injection Kit
NoProductScoreAction
1AEM Electronics COMBO Water/Methanol Injection Kit & AEM Water/Methanol Injection Filter9.8Check on Amazon
2Stage 2 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings)9.8Check on Amazon
3AEM (30-3304) V2 Water/Methanol Injection Standard Controller Kit with Internal MAP Sensor9.4Check on Amazon
4AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor9.2Check on Amazon
5AEM 30-3003 Water/Methanol Injection Filter9.2Check on Amazon
6AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor9.2Check on Amazon
7Snow Performance SNO-201 Injection Kit (Gas Stage I The New Boost Cooler Forced Induction Water/Methanol)9Check on Amazon
8AEM (30-3301) V2 5-Gallon Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor8.8Check on Amazon
9AEM (30-3303) V2 Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor8.6Check on Amazon
10AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor8.4Check on Amazon

Comparison Chart for Best Methanol Injection Kit

In this article we've included our suggestions for the Methanol Injection Kit after analyzing 40983 reviews.

Table Of Content:

1. AEM Electronics COMBO Water/Methanol Injection Kit & AEM Water/Methanol Injection Filter

2. Stage 2 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit (Red High Temp Nylon Tubing, Quick-Connect Fittings)

  • Adjustable Boost Activated Progressive Water-Meth Delivery
  • 100% Methanol Resistant
  • Low Level
  • Includes: 300 PSI UHO Pump, 3Qt Tank, Adjustable Progressive VC-50 Controller/Harness, (20′) Red High Temp Nylon.

3. AEM (30-3304) V2 Water/Methanol Injection Standard Controller Kit with Internal MAP Sensor

  • Legal in California only for racing vehicles which may never be used upon a highway
  • AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component.
  • Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame.

4. AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings.
  • Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min) 1 gallon tank with integral conductive low-fluid sensor and positive lock connector.

5. AEM 30-3003 Water/Methanol Injection Filter

  • Simple to install, takes less than a minute
  • Polypropylene housing-rugged material that is compatible with high concentrations of methanol
  • Completely serviceable assembly, can be disassembled, cleaned and reused for a long service life
  • Stainless Steel mesh strainer-AEMs custom mesh strainer filters down to 40 microns, much smaller than similar filters.
  • Large Filtering Area assure long service life and does not significantly reduce flow

6. AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

  • Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
  • Pump does not cycle on/off and provides quiet, smooth operation; it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
  • Precision-machined billet-aluminum injector with integral check valve; three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min); tank-less 35 PSI Boost dependent gas water/methanol system.

7. Snow Performance SNO-201 Injection Kit (Gas Stage I The New Boost Cooler Forced Induction Water/Methanol)

  • Innovative engineering, extensive field testing
  • Exceptional quality control
  • Provides longer Brake life and performance

8. AEM (30-3301) V2 5-Gallon Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor

  • Boost Dependent HD controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off solenoid.
  • Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; pump’s quiet, smooth operation is almost undetectable.
  • Two precision-machined billet-aluminum injectors with integral check valves include multiple nozzles to cover a wide range of horsepower levels (500cc/min and two 1,000cc/min).
  • 5 gallon tank with anti-slosh technology and high tech conductive low-fluid sensor with positive lock connector 20 feet of Nylon injection tubing included LED dash light for system status and low fluid warning.

9. AEM (30-3303) V2 Water/Methanol Injection Kit with HD Controller and Internal MAP Sensor

  • Boost Dependent HD controller features large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
  • Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off solenoid.
  • Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; pump’s quiet, smooth operation is almost undetectable.
  • Two precision-machined billet-aluminum injectors with integral check valves include multiple nozzles to cover a wide range of horsepower levels (500cc/min and two 1,000cc/min).
  • Tank-less Boost Dependent HD Diesel water/methanol system

10. AEM (30-3306) V2 Water/Methanol Injection HD Controller Kit with Internal MAP Sensor

  • Legal in California only for racing vehicles which may never be used upon a highway
  • AEM strongly recommends that users never exceed a 50 percent methanol concentration when using any AEM Water Methanol system or component.
  • Methanol is a toxic and highly flammable chemical; 100 percent Methanol ignites easily and burns vigorously with an almost undetectable flame.

How To Choose The Best Methanol Injection Kit

Does the thought of finding a great Methanol Injection Kit stress you out? Has your mind been juggling between choices when it comes to buying Methanol Injection Kit in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Methanol Injection Kit for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Methanol Injection Kit. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Methanol Injection Kit in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Methanol Injection Kit currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.


Top Methanol Injection Kit brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Methanol Injection Kit based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Methanol Injection Kit before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Methanol Injection Kit they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Methanol Injection Kit, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Methanol Injection Kit before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Methanol Injection Kit will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Methanol Injection Kit if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Methanol Injection Kit on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Methanol Injection Kit on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Methanol Injection Kit featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *